
CT-CCV6X Intel Atom D2000/N2000 COM Express Type 6 Module
27
4.8 PCI Express
4.8.1 PCI Express x1
There are four one-lane PCI Express ports available in the PCH NM10. The
ports are compliant to the PCI Express 1.0 specification running at 2.5 Gb/s.
Only two PCIe x1 Ports, 0~1, are left on the CT-CCV6X COM™ Express
connector since Port 2 is occupied by GbE and Port 3 is occupied by USB3.0.
PCIE[0:1]_TX+
PCIE[0:1]_TX-
PCI Express Differential transmit Pairs 0 through
1
PCIE[0:1]_RX+
PCIE[0:1]_RX-
PCI Express Differential receive Pairs 0 through
1
PCIE_CK_REF0+
PCIE_CK_REF0-
Reference clock output for all PCI Express and
PCI Express Graphics lanes
4.9 High Definition Audio
The High Definition Audio (HDA) controller is integrated with PCH NM10. It
communicates with the external codec(s) over the Intel® High Definition Audio
serial link. The controller consists of a set of DMA engines that are used to
move samples of digitally encoded data between system memory and an
external codec(s). The PCH implements a single Serial Data Output signal
(HDA_SDOUT) that is connected to all external codecs. Three Serial Digital
Input signals (HDA_SDIN[2:0]) provided by the PCH support up to three
codecs.
Reset output to CODEC, active low
Sample-synchronization signal to the CODEC(s)
Serial data clock generated by the external
CODEC(s)
Serial TDM data output to the CODEC
Serial TDM data input from up to 3 CODECs
Komentáře k této Příručce