Digital Broadcaster User Manual v. 3.4 rev. 3421 9 July 24, 2008
o IP Address – Select either DHCP or Static. If Static, enter the assigned
the IP address. TelVue generally recommends a Static IP address so any
possible port forwarding does not become stale due to IP address changes.
If DHCP is used, the assignment should match the MAC address of the
Digital Broadcaster. The default is Static IP address 1.1.1.1.
o Netmask – Enter the netmask value for your network. The default value is
255.255.255.0.
o Default Gateway – Enter the default gateway IP address. The Default
Gateway is generally the device on your network that routes Internet
traffic to the Digital Broadcaster, for example a cable or DSL router.
o Domain Name Service – Enter a primary IP address and up to two
additional DNS IP addresses. The DNS IP addresses are addresses of the
servers that translate domain names (computer hostnames) to IP addresses.
5. Click Save and Apply to apply the settings. You will need to enter the new URL
to access the Web Application or system administration once the change has taken
effect. If you selected DHCP, the Digital Broadcaster will reboot to pick up its IP
address. Wait for the Digital Broadcaster to reboot completely before proceeding.
When the server begins playing out the continuity clip or scheduled programming
and you can access the User Interface, it has fully rebooted. If you do not know
the assigned IP address for DHCP, check your DHCP server client table.
Using Webmin to Configure Server Settings
From a PC or laptop on the same network as the server, you will login to Webmin and
configure the server’s time zone and file sharing settings.
1. Go to http://nnn.nnn.nnn.nnn:10000 in your web browser. This will take you to
the Webmin system administration web interface. This example uses
http://127.0.0.1:10000.
2. Enter psgadmin for the username and password and click Login.
Komentáře k této Příručce